Gel Stain Kitchen Cabinets – Gel stain is a pretty fond product to use for weekend warriors who want to achieve the greatest impact with the least amount of work. The way to do this is to change the color of your cabinets with gel staining. Since the gel stain can only darken cabinets, it does not make them clearer, it is ideal for use in very light woods such as oak. The gel formulation gives you good control and allows you to superimpose both the stain as you want to get the perfect shade. Renovating the finishing wood furniture is one of the simple and most cost effective ways to make the whole kitchen or bathroom look fresher.
But having the closets removed, completely stripped and especially resurfaced can take a lot of time and may cost a little more than you want to spend. That does not mean, however, that you cannot yet repaint the cabinets you have. Gel stains can be applying over the existing stain of your gel stain kitchen cabinets to change the color without much effort. Remove cabinet doors and drawer fronts, if possible. Save the items stored in the room that you do not want damaging. Cover the inside of drawers and cabinets with newspaper or lightweight plastic secured with adhesive tape. Clean all surfaces to be refinish with a cleaner containing trisodium phosphate.
25 Photos Gallery of: Steps Applying Gel Stain Kitchen Cabinets
Wipe the gel stain kitchen cabinets with a damp cloth to remove the cleaner. Dry the surfaces well with a towel. Lightly sand the fronts of the drawers and doors with 150 grit sandpaper. Remove the entire transparent layer of these pieces to make the appearance look cloudy. Vacuum everything with a vacuum cleaner hose from workshop to clean the resulting debris. Apply a little of the gloss surface with a clean white cloth. Rub the gel stain generously on all sanded surfaces. Wait one hour. Dip a white porcelain 2-inch bristle brush on the gel stain.
Brush the gel stain kitchen cabinets spot very finely on all the pieces of wood in the direction of the grain. Use short, quick strokes of applying the stain and the single work in one direction. Mix the defined areas with the brush and a small amount of stain. Rub the stained surfaces gently with soft, white cloths to remove any additional blemishes. Allow the stain to dry 24 hours before adding a second layer if you want to intensify the color. Wait 24 hours once you are satisfying with the appearance of the stain to dry completely. Apply two layers of clear wood finish, such as polyurethane, on varnished surfaces.