Side table with drawer is a practical piece of furniture. This design allows for customization of dimensions and the number of drawers installed. Tweaking these options will produce unique furniture that perfectly fits the space and its needs.
26 Photos Gallery of: Side Table with Drawer Ideas
Build the table
Side table with drawers stand up two 2 by two after 24 inch posts and have an assistant keep them parallel to each other, so that there is a space between them of 10 inches. Place a 1/2 with 3 with 16 inches on board with their flat side on the posts. Center the board on top of the posts in both long and short dimensions. Drill a hole through the top of this forum and in each leg post. Attach the leg support board to the posts with 1 1/4 “wood screws. Repeat for another set of two posts and a board.
Place one of 18 with 18 inch tables on board up and down the work surface. Place the two leg sets on top of the table, with exactly 10 inches of clearance between the two sets of posts. Center the long dimension of the leg support board between the edges of the table top. Drill four holes through each leg support board and into the table top. Attach largest boards to the table top with 1 1/4 inch wood screws tightened in each hole.
Arrange four 1/2 with 4 of 11 1/2 inch discs in a perfect square of side table with drawer, with their ends touching one end to side repetitive patterns so the final dimension of the square is 12 by 12 inches. Drill two holes in each joint, through the outside of a board and into the end of the adjacent board. Fasten the boards together with 1 1/4 “wood screws.
Set a 1/2 with 12 with 12-inch board on top of the square frame. Drill holes through the board and in the frame evenly distributed every four inches. Attach the board to the frame with 1 1/4 “wood screws. Stand the box upright on a small end. Place a 2/1 of 5 with 13-inch on board evenly on top of the box. Screw four holes up through the inside of the box frame and into this top board, which is the box front. Attach the box frame to the frame with 3/4 inch wood screws.
Place the box in the 12-inch gap between the side tables with drawer legs. Mark the location of the bottom plate of the box on the inside of each table leg. Take out the box and hold a 1/2 with 1/2 with 12-inch board against each other mark so the top of the board is also with the mark. Drill a hole through each board and into each leg it touches. Attach boards to each leg with 3/4 inch wood screws. Slide the box on top of these boards and repeat for additional boxes.