Patio shade covers – Creating shade on your open patio can let you enjoy the summer weather even when the sun is at its hottest. Depending on your carpentry skill and appearance you desire for your home, you can choose a simple. Cheap patio shelter or a more complex and beautiful look. For concrete patios, attach shadow structure for sure so powerful winds do not roll it over. This can be done with concrete anchors or simple weights, depending on the structure. For wooden patios, simply screw the solid structure if needed.
Create beautiful structure patio shade covers that give shade to your patio by combining cedar and vines into an open-weave structure called a pergola. Place a robust cedar post in each corner of the area you want to shadow and tie them together at the top with 2 – of 6-inch timber. Place additional lists of 2-of-6 work over the top. If each piece on the edge about 6 to 8 inches apart. Secure them securely with screws or nails and brackets. Cut the ends with decorative angles for extra power. The plants vines alive at the base of the pergola. And weave them up the posts and the entire top slats until you have the nuance you want.
25 Photos Gallery of: Patio Shade Covers Styles
If you like patio shade covers look of wide screen umbrellas. But do not want to fill your patio with tables that have umbrella stands. Find great decorative pots and place a PVC tube in the middle of each. Make sure that the tube has an inner diameter that is just barely wider than your umbrella pole. Including some bumps or steering wheel, then pour concrete around the tube to hold it in place. Make sure not to get the concrete inside the pipe. Place an umbrella inside the tube and open it, which allows the weight of concrete-filled plants to anchor it. Place a planter/umbrella combination in each corner of your patio or wherever you need one to create overlapping pools of shades.
Connect a series of PVC tubes and angle or corner joints, available on hardware and home improvement stores. To design a structure that fits your patio shape and size. Cover the top of this structure with medium-tan canvas fabric in the color of your choice. Adding a waterproof coating in the rain areas. For additional patio shade covers or integrity, hang medium or lightweight fabric down the sides of your PVC structure and tie it back if necessary with decorative tape. Adding contacts in your shadow structure support leg to create the “wall” pipes page you can hang fabric from for a low half-wall or use as a drying area for pool towels.