Epoxy Flooring Garage – Epoxy is the toughest concrete finish available for garage flooring. It is impervious to almost all chemicals, maintains its brightness and prevents moisture, grease, and oil from penetrating the pores of the concrete. However, epoxy is not an easy finish to work with. And the end result will depend on how well the floor has prepare prior to seal. The floor must be completely clean and free of any grease or oil and record chemically or mechanically to ensure a solid bond between the concrete and the epoxy or the finish will not adhere permanently. Determine whether the garage floor has a seal or end up dropping a couple of drops of muriatic acid onto the floor in several different areas.
Remove any finish using an industrial separator. Polymer coatings can be remove with ammonia strippers. But paints and solvents seals need to be removed with a heavy duty paint remover such as methylene chloride. If not ammoniac or strippers Remove the seal, the finish on the finished concrete is probably epoxy flooring garage. Remove grease and oil by mixing a strong butyl based degreaser solution and flooding the garage floor. Mix one part Muriatic acid with 10 parts water and wet the entire surface of the concrete with the solution. Allowing a few minutes for the surface etching solution. Allow the floor to dry. In dry climates, this will require at least two days.
25 Photos Gallery of: Finishing Epoxy Flooring Garage
However, you will need to allow one at least four days in the wetlands. Once the soil preparation is complete, fill cracks or holes in the garage floor with a patch of good quality epoxy flooring garage concrete. Although epoxy is stain resistant, you can sometimes notice marks on your garage floor epoxy. Because epoxy is a non-porous material. Substances that come in contact with the garage floor will not be able to squeeze through and leave permanent stains. Remove any cartons or mechanical elements that are sitting directly on the garage floor. Sweep the garage well to remove all dirt and debris. The dirt is abrasive and can scratch epoxy.
You should remove it prior to cleaning to ensure that you do not accidentally scratch your epoxy flooring garage while cleaning the marks. Mix equal parts of ammonia and water and mop the epoxy floor with the mixture, specially marked purification well. Select a standard household degreaser to clean your epoxy floor if the ammonia mixture does not clean the marks. Marks on your garage floor are probably cause by a grease base substance. Apply degreaser directly to the marks and rub gently with a soft brush bristle brush, working the degreaser on the marks.