Custom range hoods – Increasingly powerful and quiet, they are essential in kitchen. We tell you what you have to keep in mind when choosing it. How many types of bells can I choose? You can find decorative bells of different sizes that are install on island or peninsula. Which are conceal in a closet and are started when pulling hinges door; horizontal, that are install under a high cabinet, and telescopic. That are integrate in high modules and are only visible when they are working. We can also make a custom case with filtering groups and a motor inside. And, finally, are surface hoods, which are install on countertop
How big should extractor hood be? At a minimum, it should have same width as hob, but ideally it should be larger to improve absorption capacity. That is, if plate is 60 cm, bell should measure 70, 80 or 90 cm. Also important is power, which is calculated according to size of kitchen. formula to hit with power is to multiply m 2 of kitchen by its height and multiply this figure by 12. Thus, a kitchen of 10 m 2 and 2.7 m in height will need a hood with a power of 324 m3 / H.
25 Photos Gallery of: Choosing Ideal Custom Range Hoods
Does a bell consume a lot of energy? Compared with other appliances, custom range hoods is one of least energy consuming. Although final expenditure will always depend on power of model that has been choose. When hood operates at minimum power, it is estimate that expenditure is about 70 w / h. And when running at maximum speed and with light on is about 200 w / h. Bells usually have three speeds. Although some already include a fourth. Do they all need an outside vent? It is always preferable to install a conducting tube that carries fumes and bad odors to outside.
However, if characteristics of house are not possible to perform this work, you can opt for a hood with activated carbon filters that work by recirculation. In these hoods air is filter (filters must be change periodically) and send back to kitchen. What should you look for when you buy custom range hoods? It is important that you have armored iron engines and not plastic to prevent grease, dust and dirt. Choose a model with several speeds and a non-return valve that prevents fumes and odors from returning to kitchen. Minimum absorption capacity should be 600-700 m 3 and loudness level should not exceed 60 decibels.