Free Standing Wardrobe – Build an “out of the box” free standing wardrobe to maximize your room space and create an alternative way to split your room space. An independent closet gets its support from its cubicle construction on a very strong foundation. When you carry out your separate closet, enjoy walking around your new storage solution. Measure the desired area width and length of your stand-alone cabinet. Cut pieces of wood 2 by 4 inches to frame the base of the cabinet on the floor. Leave a door opening the width of the door plus 6 ¼ inches for the wooden studs and door frame.
Cut the same pieces piece of wood 2 by 4 inches, without leaving an opening for the door free standing wardrobe. By the top or ceiling of your separate cabinet. Set this wood aside. Line 2-by-4-inch wood on the floor and screw the floor with a regular electric drill for hardwood floors or with a percussion drill for concrete floors. Pre-drill holes and attach anchors to them before screwing securely to the floor. Construct each side wall of the cabinet on the floor. Use the height measurement of the cabinet wall. Less than 4 inches from the base and 2 inches from the top cut your wall studs. Cut out so many wall studs that are needed to space them every 12 inches along each wall.
25 Photos Gallery of: Build Free Standing Wardrobe
Cut a base piece and a top piece of wood 2 by 4 inches for each wall using the same width measure as the base plates will already be affixed to the floor. Place the wooden wall studs 2 by 4 inches in the middle and perpendicular to the top and base pieces free standing wardrobe. Space them 12 inches apart and nail them into the top pieces and 2 by the 4-inch wood base. Lift each wall over its base plate to be fix to the floor. Screw these into the base plates at various locations using heavy 3-bolt or 4-inch deck bolts.
Reinforce each corner of the free standing wardrobe with an extra 2-by-4-in-wood stud aligned against the end of each 2-4-inch wall by wooden posts. Screw the wood corner together, and screw the extra wood 2 by 4 inches into these nails. Measure the length of the top of the cabinet independent of a side wall to the opposite side. Cut enough wood pieces 2 by 4 inches of space to them every 12 inches at the top. Bolt them through the top frame of the side walls.