Boulder retaining wall – With relatively little effort and reasonable cost, a faux stone support wall can create a level that enhances the appearance and function of your sloping lawn. Faux stone is one of many prefabricated wall materials available that can make your support wall look like an expensive professional job, although it is quite easy to build and relatively cheap. Prior to major changes in your residence, but make sure that rules or laws of homeowners association or other authorities allow such work. Some wall construction projects may need to be inspected and approved before they begin.
Tools and materials
Finding good boulder retaining wall is probably no more difficult than taking a trip to the hardware store. The materials are available in a variety of shapes, sizes and colors. The easiest to work with is no more than 8 inches to 10 inches long and has an internal lip for easy locking. Blocks with rounded surfaces are also easier to create walls like the curve of the landscape. The boulder retaining wall will need replenishment materials such as sandy and porous landscape fabrics. The tools are involved including wooden stakes, a water pass, masonry line and a digging implement. It is also recommended that safety equipment, glasses, gloves and backrests be used on all occasions.
26 Photos Gallery of: Boulder Retaining Wall Ideas
To begin, start at the lowest point on the wall and dig a ditch for the foundation sufficiently deep to cover the entire first layer of rock blocks so that the ground holds it in place. Place a thin layer of sand first as a base, then the blocks. With the first layer in place, block the blocks until they are level. Use the inserts and masonry line to mark the ends of the wall and the final desired height, given that a faux stone support wall should be built no more than 3 meters long to remain safe and stable. With these markers in place, put the blocks in place, stack to full height and regularly check the level.
Depending on the design of the bricks, it may be necessary to dig successive dikes if the wall is stepwise or the ground is extremely sloping. Use that level one last time to judge the top row of blocks and adjust if necessary. Line the cavity behind the wall with the porous landscape fabric and sand. Top with soot or surface properties. Calculation of the boulder retaining wall needed for a support wall will be different depending on the type of stone you are using. There are Oblate, Natural, Keystone, Rosetta, Terrace, and Quarry, just to name a few. This article will cover the basics of calculating almost any rock for a support wall.