48 inch bathroom vanity with top – Bathroom vanity countertops are a beautiful way to make extra counter and storage space while adding the appearance of the room. Bathroom vanity is made of many different materials that each has its own advantages. Wood vanity tops are a neutral choice, which means that the warm golden tones of solid wood peaks will coordinate with any core installing a wood top in the bathroom is not an easy decision. The moisture in the air and the water that will be play on the bathroom counter are important factors when choosing a vanity top. Wood vanity tops are good for bathrooms as long as they are properly treat during installation and well maintained throughout their lifespan.
Measure and list in 48 inch bathroom vanity with top plywood to fit the top of the cabinet. The strips of plywood should be 4 inches wide and run across the width and length of the cabinet. Do not install any tape where the sink will be installed. Drive 3-inch tires screws from the top of the plywood in the cabinet frame to secure the tires in place. Add the dish to the top of the butcher. Trace the outlines of the sink on wooden top with a pen. This old house recommends a drop-in sink for wood counters, as they are less harmful to the wood. Cut along the pencil marker with a router. Rub marina-grade sealant oil in the recess. Let the oil absorb into the wood. Apply a second layer.
25 Photos Gallery of: 48 inch Bathroom Vanity with Top Ideas
48 inch bathroom vanity with top spread a thin line of construction glue on wooden strips and along the frame of the cabinet. Place the butchers on the cabinet top. Shift the worktop so evenly distributed on the cupboards. Squeeze the top of the cabinet with C clamps. Drive the tires screws from below the cabinets through the plywood and into the wooden top. Purchasing tires screws that are sufficiently short so that they will not cut through the top of the counter. The slaughter bench will pull close to the cabinet frame. Secure with a screw for each plywood strip.
Apply a binder to the zinc lip. Drop into the hole in the 48 inch bathroom vanity with top. Allow the glue to dry. Back plumbing. For a more modern, add a bit of industrial style to your bathroom with a metal cabinet or two to create your bathroom vanity. Pick up a large metal cabinet from a retailer or check out an old school item sale buy some old card cabinets to create your bathroom storage space. If you prefer an open look, install open metal shelves in a style that fits your interior.